Fleck 5600sxt 48000 water softener

Fleck 5600sxt 48000 water softener

Nowadays, hard water is a big emerging water problem in the USA. Around 85% of households are going through the hard water problem. So it is very important to look for a better solution for this problem. If you are looking for a water softener for a big or medium family then you can consider the Fleck 5600sxt digital metered 48,000 Grain Water Softener. In the electronic display of this system, you will find some unique specifications in the setting section.

Regeneration is required in this salt-based system, so to keep this in consideration the Fleck makes this process automatic so there would be no need to worry about the regeneration. It takes very little time to make the hard water soft and its efficiency of softening hard water is very high. So if you are looking for a system whose efficiency of softening hard water is very high in no time then you must choose this Fleck 5600sxt system.

A number of customers are using this system and satisfied with its efficiency and speed. You will find that this system is also very good economically.

Fleck 5600sxt 48000 water softener

If we see, normally a water softener is a mechanical system. The water softeners use the process of ion exchange in which they exchange some minerals with other substances like sodium in most of the cases to soften the water.

If we are looking inside the system, there is a mineral tank in the softener which is filled with zeolite or resin. In the process, the calcium and magnesium which are present in water take the positive ion and the negative one is taken by resin. Due to this, the charges stick with the minerals. There is another tank called a brine tank. In this common salt is used to make the solution more brine so that it will be easy to soften the water.

In normal functioning we can understand this as when the hard water reaches the mineral tank, the minerals like calcium and magnesium which are present in hard water get attached with the beads of resin. Along with this, the common salt which is present in the brine tank gets substituted with the water. After this, the process entered into a 3-phase regeneration cycle. Firstly, the backwash stage helps to flush out the dirt from the tank. Secondly, the sodium-rich common salt in the brine tank helps to collect the magnesium and calcium and move them to the drain point. At last, the brine tank flushes out the brine solution leftovers and then refilled them for the next cycle.

Fleck 5600sxt 48000 water softener Efficiency

Fleck 5600sxt 48000 water softener

As we have already discussed earlier that this system is based on the ion exchange method. You might be wondering why common salt is used in the system. The fact is that in hard water the minerals like calcium and magnesium are capable of damaging your appliances. So sodium ion is used which is safe which helps to make them flush out from your water.

In this process, it is normal that the water softener reaches its maximum limit of making water soft in a few months. So to make the water soft again, the system regenerates itself by flushing out the unnecessary ions like explained earlier from the brine tank to continue the working.

One thing that is also needed to consider about the water softener is that the water softened at the current moment is not so soft that we can use it instantly. So meter generation provides the 4 different modes of operating this system :

  • Immediate meter regeneration
  • Day weekly meter regeneration
  • Delayed clock regeneration
  • Delayed meter regeneration

The setting of the system is a little bit complex but you will grasp how much time it usually takes to reach its full capacity in a few weeks. You can also set the setting like when the tank is 90% filled then start the generation so after that it will start regeneration automatically whenever the tank reaches its 90% capacity.

Fleck 5600sxt 48000 water softener

The resin brine tank capacity is 1.5 cubic foot which is good enough to store much of resin for ion exchange. This brine tank capacity is good enough for a family of 4 to 6 people. The standard brink tank size is 14x14x34 which can hold 250lbs salt. This tank can hold up to 4 bags of salt which is good enough in comparison with 4 person family which generally requires 1 bag of salt in a month by this system.

You need not to worry about the overfilling of the tank as the tank is equipped with a security float. 

If we are talking about its water flow rate then you will be amazed to know that it is capable of making 20 gallons of water soft in a minute which is good enough for a very large family. The water flow requirement more than this can only be needed in resorts or something like that. 

With some DIY skills, one can install this system in 1-2 hours. Fleck Installation and Programming Video

In the Nutshell

If you are also facing problems related to hard water like limescale in the pipes or appliances damaged or reducing the lifetime of your water filters then it is very advisable to look for its solution. Because this problem puts a very heavy weight on your pocket and your health. The Fleck 5600sxt 4800 water softener system is a very highly rated system. There are a number of satisfied customers with this system. It saves a lot of money with its regeneration process. For this system, we can say that it is an optimal solution for the household with hard water problems.

Check the price on Amazon.

Leave a Comment